Storing tools properly, especially gas-powered leaf blower is essential to maximize the life of the leaf blower. In this guide, we’ll provide a simple, step-by-step guide, how to properly store a gas powered leaf blower after completion the task of removing leafs from your yard or garden or for other purposes.
Gas powered leaf blower are especially vulnerable to freezing temperatures, and you have to take steps to make sure they are not damaged by the cold.
If you own a gas powered leaf blower and are wondering about the best way to keep it safe. Here, we have mentioned gas leaf blower storage guide below:
1. Get all the Leaves Out
Run your blower in both blow and vacuum mode, switching between the two several times. This ensures that you can get all leaf bits and pieces and as much dust as possible out of the tube. If you don’t have a vacuum type blower, this step doesn’t really matter.
2. Make sure there is no Gasoline Remaining
When left to sit for extended periods of time, gasoline turns into a sticky varnish that is definitely not good for engines. Therefore you must get all the fuel out of your leaf blower possible.
Start by draining nearly as much of the fuel as you can. Leave just enough so that you can start your blower.
Then, start up the blower, and let it run until it stalls. Attempt to start it again. If it starts, run it til it dies, and repeat until it will no longer start. This ensures all of the gasoline is burned.
3. Oil the inside of the Engine
Remove the spark plug of the engine and pour a thimble’s worth of motor oil inside. Slowly pull the starter rope a couple times to ensure the oil is covering the insides of the engine. Then, replace the spark plug. You may leave it disconnected, but if you do so, be sure to protect the connector with tape to avoid oxidation.
4. Drain the Engine Oil (4 stroke engines only)
This step is optional if you use your blower infrequently, but is recommended. Open up the drainage port and drain the motor oil into a pan, and dispose of it in a manner that is kosher with your local regulations.
5. Wipe down the Exterior
Grab an old rag and clean off the exterior. Yes, it’s an outdoor tool, but treating it with care goes a long way. No need to have dirt marks to become permanent stains on your machinery. Apply a light layer of oil or other metal oxide to avoid oxidation.
6. Store in a Dry Place
Moisture is the enemy of tools. Be sure to store your leaf blower in a dry place to avoid it becoming moldy, or worse, causing any steel parts to rust. If you’d like, you can wrap it in a cover to avoid collecting dust.
How much Gas in Leaf Blower
Well it depends on your leaf blower, and its storage capacity. Every top brand of blower focus on making lightweight of blower thats why its normally not more then 1lbs.
How Winterize Your Gas Powered Leaf Blower?
To winterize your gas powered leaf blower, first of all you have to prepare the engine and the gas tank before draining the system of all fuel. The best way to start preparing your gas leaf blower for winter storage is to make it a good cleaning. All the dirt and grime that has accumulated on your blower are things that will trap more dirt and moisture, plus the same dirt can get into your engine parts as you try to do other maintenance steps.
How do you store a Leaf Blower?
As it name shows leaf blower deals with leafs and dirt so to use it for next time or next season you must have to store your leaf blower properly by hanging in a hook in store and properly clean it.
What is the Best Gas Powered Leaf Blower?
Any gas powered leaf blower which works last with low noise,lightweight and low fuel consumption is the best gas powered leaf blower. You can get the list of best gas powered leaf blower on top menu of our site.